NewBeetle.org Forums banner

Search results

1-20 of 24 Results
Advanced Search
  1. engine drags after timing belt & cylinder head replacement

    1.8 Liter Turbo
    I am back. I went and got a canister, speed sensor and the hose that keeps falling off. I'll be putting that stuff on tomorrow. I am praying that those things will fix my fault codes...
  2. Has my ECM died?

    2.0 Liter Gas
    Don't you think I have already done that before I posted. It didn't tell me anything . I guess I am just going to have to get a new ecm
  3. Has my ECM died?

    2.0 Liter Gas
    The positive that goes from the post to the connections above it was loose but I tightened that. Still the same problem. I attached the read-out from the scanner.
  4. engine drags after timing belt & cylinder head replacement

    1.8 Liter Turbo
    Yes it's a real automotive smoke/nitrogen test machine. A friend of mine has an auto repair shop and I have access to the equipment. I got to work for a couple of days but then I'll be back.
  5. Has my ECM died?

    2.0 Liter Gas
    My 2001 beetle won't start!! It turns over fine but doesn't even try to start. As soon as I turn the ignition on all my dash lights start going crazy (flashing on/off, incl. airbag and MIL) accompanied by annoying beeping.I tried my scan tool but it won't communicate with the ECM but it...
  6. engine drags after timing belt & cylinder head replacement

    1.8 Liter Turbo
    I got another fault code today po455. I can't figure out why I would have a big leak now since I just fixed the small one and there's no smoke coming from the replacement valve. So I did another smoke test today and I see smoke coming from the plastic thing that is attached to the right of the...
  7. engine drags after timing belt & cylinder head replacement

    1.8 Liter Turbo
    I found the part at the junk yard but it didn't solve the po442. I must have another leak somewhere. I guess I am going to spend tomorrow looking for that leak. Meanwhile I have figured out what is causing that annoying beeping sound.. The car thinks the top is not open completely so the car...
  8. engine drags after timing belt & cylinder head replacement

    1.8 Liter Turbo
    That wasn't it. Here's a couple of pics. Top hose is attached by heat and melted to it. Bottom hose has the usual hose clamp. To the left is the fuel filler neck and to the right is the vacuum reservoir.
  9. engine drags after timing belt & cylinder head replacement

    1.8 Liter Turbo
    That vw parts site totally helped. I belief its the Secondary Air Injection Pump Check Valve. Which makes sense considering the latest Code I got. PO411. But I will still post a pic later to confirm.
  10. engine drags after timing belt & cylinder head replacement

    1.8 Liter Turbo
    I tried to take a pic of it but I couldn't find my cameras sd card. The diagrams i've found don't show anything between the reservoir and filler neck. Also junkyards are my favorite hangout good place to meet guys (that was a joke in case you haven't realized yet that I am a woman...)! At least...
  11. engine drags after timing belt & cylinder head replacement

    1.8 Liter Turbo
    i found the evap leak that PO442 pointed out. Its a valve on top of the rear right wheelwell between the filler neck and the blue reservoir. I can't find it on any diagram and in order to get a new one I need to know what it is called. Any ideas? The beeps not related to temperature. It beeps...
  12. engine drags after timing belt & cylinder head replacement

    1.8 Liter Turbo
    It only covers Toyota, Honda, Acura, etc but no German cars. I have been trying to do the drive cycles but nothing so far, 3 i/m are still blinking. But now a trouble code showed up PO442 but no MIL. Could that annoying beep be caused by the airbag problem?
  13. engine drags after timing belt & cylinder head replacement

    1.8 Liter Turbo
    After fixing a somewhat loose ground cable I tested again then erased and re-scaned after driving a bit and at the moment i have no trouble codes and the MIL hasn't come back (knock on wood...). But I have 3 i/m that are flashing which I believe means that those monitors have not yet met the...
  14. engine drags after timing belt & cylinder head replacement

    1.8 Liter Turbo
    I looked into it but I simply can't afford it. But there is something weird about the codes I am getting. I got 3 or 4 codes which I erased. Then, after running the engine for a bit I checked the codes and now I have 1 code that was there before but 3 other that were not.I erased them again. The...
  15. engine drags after timing belt & cylinder head replacement

    1.8 Liter Turbo
    i AM GOING TO LOOK INTO IT.
  16. engine drags after timing belt & cylinder head replacement

    1.8 Liter Turbo
    Like the sound it makes when you do not completely disengage the handbrake. My sound comes on every time I hit the accelerator. I am not sure why. I only have that one po code and the check engine light is on and a yellow triangle with an exclamation mark and an arrow looping all the way around...
  17. engine drags after timing belt & cylinder head replacement

    1.8 Liter Turbo
    Any idea which fuse controls the notification beep? Can I disable that sound while i am working on it?
  18. engine drags after timing belt & cylinder head replacement

    1.8 Liter Turbo
    Had all the codes cleared but one came back PO442. Maybe I damaged the canister when I was putting the engine mount back on. That mount was a nightmare. But it had to come of since the timing belt loops around it. It was easy when I got the cylinder head at the wrecking yard. I got it from a...
  19. engine drags after timing belt & cylinder head replacement

    1.8 Liter Turbo
    I have replaced the head and everything is back together. Started up on the second try!! But now i have a bunch of trouble codes. PO102, PO177 P, PO354, PO413 and PO442. Does anybody know what the mean? and how to fix them?
  20. engine drags after timing belt & cylinder head replacement

    1.8 Liter Turbo
    Probably not so i'm going to replace the entire head with another one I already have. Didn't want to do it the first time around but now I'll have to but I am not really looking forward to it...
1-20 of 24 Results
Top