VW Beetle Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
18,828 Posts
So, the present two hoses don't need replaced but you are trying to figure out, how to hook, everything back up correctly and/or replace the missing third hose?


 

· Registered
Joined
·
18,828 Posts
Ok, well the above service manual links; give some info but you might post a photo, then you can confirm, things are hooked up correctly. Then, maybe someone with a 2.0L; might post a photo of their engine and help you, to make sure, you have everything set up correctly. If everything is apart; this is a good time to clean the throttle body, replace the gasket and do a throttle body alignment.


NOTE: check the hoses connecting to the throttle body and PCV system, it is very common, for them to fall apart, get gooey, need replacement.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top