NewBeetle.org Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
34 Posts
Discussion Starter #1
I had checked the torque (20nm) and was still getting the CEL. Today my task was to change the drivers side with the passenger side, to see if it was the wiring or the sensor. Snake my arm down to pull the connector off, it was already off. Pulled the sensor and this is what I found. Both terminals were bent over (PO had worked on this), I straightened one before taking the pic. Put the sensor back in, plugged it in, no CEL so far. Hope maybe this can help somebody some day that might find this.

 
1 - 1 of 1 Posts
Top