[funky]

Can anyone tell me if the P0327 knock sensor code is the sensor on the passenger side or drivers side? I thought there was a P0333 code which was for the other 2 cylinders. I have the P0327 code and want to make sure I replace the correct one first. Does the electrical connection just pop off or is there a tab that needs to be pushed?

 

[pencilneck]

16711/P0327 - Ross-Tech Wiki

So the P0327 is for Knock Sensor G61. G61 is between cylinders 1 and 2.

Ohm test across the 2 terminals of the Knock Sensor, should be open circuit. If you have any continuity across the Knock Sensor terminals, replace it.

Torque bolt down to 20Nm, no more, no less. If you don't have an accurate torque wrench, now is the time to invest in one.