Several bad codes - spark knock?

1979 Views 6 Replies 4 Participants Last post by geniushanbiao, Jan 11, 2012

srousonelos

Discussion Starter · Jan 9, 2012

Hi all, new to the "new" bug family. Last one I had was a 74' and things have changed. I got a used 2000 with a 2.0 Car runs great once you get passed 40mph. Before that, especially under load, it seems to have a spark knock. It is definitely coming from top of the motor. (acts as though it is bad crank or rod bearing) but the noise is coming from the top. To hear the knock, I have to put it in drive, hold the break and gas it to about 1500rpm's.

Today I took it in to my parts store and got the following codes - P0411, P1582, P0300-P0304 and finally P0137

I have changed the spark plugs, wires and ignition coil.

Again, this is strange because the motor runs perfect in park and after aprox 40mph's. Any ideas or is it time to break out the check book?

Thanks, Stan the man

Save

1 - 1 of 7 Posts

Smileybug

· #2 · Jan 9, 2012

Looks like you got yourself a bunch going on...

16795/P0411/001041 - Ross-Tech Wiki
16795/P0411/001041 - Secondary Air Injection System: Incorrect Flow Detected
Possible Symptoms

Malfunction Indicator Light (MIL) ON

Possible Causes

Fuel Pump Relay (J17) faulty
Hoses/Pipes to/between Components faulty/clogged
Secondary Air Injection Pump (V101) faulty
Secondary Air Injection Pump Relay (J299) faulty
Secondary Air Injection Solenoid Valve (N112) faulty

Possible Solutions

Check Fuel Pump Relay (J17)
Check Hoses/Pipes to/between Components
Check Secondary Air Injection Hoses/Pipes for Carbonization
Check Secondary Air Injection Pump (V101)
Check Secondary Air Injection Pump Relay (J299)
Check Secondary Air Injection Solenoid Valve (N112)

------------------------------------
17990/P1582/005506 - Ross-Tech Wiki
17990/P1582/005506 - Idle Adaptation Limit Reached
Possible Solutions

Check Fuel Pressure
Check Intake System for Leaks (False Air)
Check Fuel Injector(s)
Check Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80)
Check Exhaust System for Leaks
Check Secondary Air Injection (AIR) for Leaks
Check Vacuum Lines for Leaks
Check Throttle Body

-------------------------------------

P0300 is random misfire and P0304 is misfire on cylinder 4.

--------------------------------------
P0137
O2 Sensor Circ.,Bank1-Sensor2 Low Voltage

See less See more

Save

1 - 1 of 7 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month