Ok, so this 01 was starting to have issues going into 1st and reverse. I read around and everything said to adjust the cables. I did, I have the gears except reverse. Opening up the boot, I noticed that when the shifter is pushed down, it is supposed to move a lever down..yes? If so, the little white pin that goes in the lever seems to have too much play in it, almost like there is supposed to be a bushing there. I did find some bits of plastic looking material inside...possible bushing? I circle in the pic the area I am talking about, but basically is there supposed to be a bushing of some type here. If so I have no idea what to call/where to get it. Thanks much...kid needs car to go back to school...
156.2 KB Views: 2,351