Hi all.
My daughters car has been sitting for a couple of months and today when I started the car, I noticed that the airbag light stays on. This has never been an issue before and I am suspecting that as there was a little water in the carpet as it has been sitting and we know how prone to leaks Vw are, it may have caused a bad connection somewhere?
So far I have removed both seats and checked the yellow wiring plug underneath both looked clean and dry with no signs of corrosion. I did a continuity check from one side of the plug to the other with a multi-meter and it was okay.
The code I get is 00003 - Controller Unit, I believe that the unit is in the centre of the bottom of the dash in front of the gear lever? P.S is there a trick to remove the plastic cover to see or do I have to remove the central panel where the handbrake is?
Many thanks
Alex
My daughters car has been sitting for a couple of months and today when I started the car, I noticed that the airbag light stays on. This has never been an issue before and I am suspecting that as there was a little water in the carpet as it has been sitting and we know how prone to leaks Vw are, it may have caused a bad connection somewhere?
So far I have removed both seats and checked the yellow wiring plug underneath both looked clean and dry with no signs of corrosion. I did a continuity check from one side of the plug to the other with a multi-meter and it was okay.
The code I get is 00003 - Controller Unit, I believe that the unit is in the centre of the bottom of the dash in front of the gear lever? P.S is there a trick to remove the plastic cover to see or do I have to remove the central panel where the handbrake is?
Many thanks
Alex
